Verifier
It
is used as dummy sonde, which can be frequency-scanned and load high pressure
and used to check electronic part of MRIL.
Dummy Cable
It
is used as dummy cable of heptacable with the length of 7,000 meters when
testing MRIL.
Dummy Load
When
calibrating MRIL, it is connected between electronic cartridge and sonde,
serving as dummy load of the formation. It has four available gears fitting
different modes of calibration.
MRIL Calibrator
It contains copper sulfate. When calibrating MRIL, it is used to locate correction factors of Echo 1 and Echo 2, as well as D1 PEAK.
Module Fixture
There are 12 module test boxes for 12 modules. They are used to test assembled modules.
Standoff
In the actual logging
operation, it is used as centralizer.
Shop Head
It
is used to connect portable surface system and downhole tools.
Non-magnet Container
It
is convenient for sonde transportation, shielding magnet of the sonde.
MRIL Assemble/Disassemble Table
It
is used to assemble, disassemble and maintain the sonde.
Stand
It
is convenient to connect tools at the workshop. It can adjust the height.
Cable Tester
It
is used to check the connectivity of heptacable.
Matrix Switch
It
is the spare part in the PTC panel of LOGIQ-B Surface System, used to control
the connection between cable and PTC.
Transformer
It
is the spare part in the XMP panel of LOGIQ-B Surface System, used to supply
the voltage of the downhole tools.