Product Name:HDRT -ARRAY INDUCTION LOGGING TOOL
Type:
|
HDRT
|
producer:
|
Huanding Energy Services
|
Description:
|
Huanding energy services newly developed new type array induction tool HDRT(High Definition Resistivity Tool),it adopts high quality high temperature material, optimum structural design, high fidelity measurement circuit, advanced data processing system, so this tool can provide reliable and rich geological information to clients.
|
INTRODUCTIONFEATURESSPECIFICATIONFIELD EXAMPLECALIBRATION AND VERIFICATIONCOMBINATION
HDRT consists of 7 receiving coils operating at six different frequency, all receiving coils share one transmitter. HDRT has totally 96 original acquired signals ,including 84 measured signals and 12 status monitoring ones. After preprocessing,skin-effect correction, self-adaptive borehole correction,software focused processing, then output curves with three different vertical resolution which is 1ft,2ft and 4ft, seven different investigation depth which is 6inch,10inch,20inch,30inch,60inch,90inch and 120inch, this tool applied to fulfill complex&heterogeneous formation logging need, it can determine oil/gas reservoir effectively, estimate reserves more accurately.
1) The sonde section applies high-strength metal, special ceramic material and compound special glass fiber as raw material, since optimized detecting mode and tool length are applied, this tool by far is the shortest array induction tool which has 120in investigation depth.
2) Electronic section adopts high-performance digital processing technology, remove some surface processing function to downhole circuit, which leading to reduce transmitting data on cable, it can be compatible with 2530 tool string.
3) A series high fidelity measurement technology have been applied on circuit design, for example, high-performance preamplifier technology, real-time temperature shifting compensation, programmed gain control, compound sine wave transmitting,etc. These technologies make sure the tool has low noise, high response, high stability, high reliability specification.
4) After been through preprocessing,skin-effect correction, self-adaptive borehole correction,software focused processing, radial inversion processing, it can output so many resistivity curves.
5) HDRT has sp sensors located at sonde section, the sensor consists of four metal points where lie on lower part of glass fiber, at inner side of glass fiber,there is a noncyclical metal ring used to connect four points, sp signal will be sent to electronic section through inner line.
温压振动
|
TEMPERATURE RANGE
|
-25℃-- 175℃
|
MAX PRESSURE
|
140MPa
|
VIBRATION
|
5g 10~60Hz 3D
|
SHOCK
|
50g 11ms
|
TNSILE
|
10000Kg
|
COMPRESSION
|
3000Kg
|
STORAGE TEMP
|
-40℃ -- 70℃
|
基本技参
|
POWER SUPPLIER
|
250VAC±10% 50Hz
|
OD
|
SONDE:93mm,CARTRIDGE:92mm
|
WEIGHT
|
SONDE:96.4Kg,POWER SUB:46Kg
|
POSITION IN STRING
|
BOTTOM
|
WORKING MODE
|
CENTRALIZED OR ABOVE 0.5IN STAND OFF
|
BOREHOLE SIZE
|
5 ~ 20 IN
|
MIN RADIUS OF CURVATURE
|
8.00METER
|
采样
|
SAMPLE RATE
|
4POINT/FT
|
RECOMMENDED SPEED
|
10M/MINUTE
|
MAX SPEED
|
20M/MINUTE
|
长度
|
SONDE SECTION
|
WITH CAP: 5350mm
WITHOUT CAP:5040mm
|
POWER SUB
|
WITH CAP: 1770mm
WITHOUT CAP:1325mm
|
WHOLE TOOL
|
WITH CAP: 6675mm
WITHOUT CAP:6365mm
|
刻度
|
CALIBRATION ENVIRONMENT
|
10M FROM MATAL,LOW POSITION1.1M,HIGH POSITION 2.0M
|
CALIBRATION CYCLE
|
< 6 MONTH
|
测量曲线
|
MAIN CURVE
|
RADIAL VERTICAL RESOLUTION MATCHED CURVES(VRM)AND TRUE RESOLUTION FOCUSED CURVES(TRF) WITH 6,10,20,30,60,90,120 IN INVESTIGATION DEPTH
|
CURVE AFTER INVERSION
|
TRUE FORMATION RESISTIVITY(Rt),INVADED ZONE RESISTIVITY(Rxo),INVADED TRANSITION ZONE INNER DIAMETER(D1),INVADED TRANSITION ZONE OD(D2)
|
VERTICAL RESOLUTION
|
1FT,2FT AND 4FT
|
测量精度
|
MEASUREMENT RANGE
|
0.2 ~ 2000Ω?m
|
ACCURACY FOR60、90、120 IN
|
±(1ms/m+2%*READING)
|
ACCURACY FOR 30 IN
|
±(2ms/m+2%*READING)
|
ACCURACY FOR 20 IN
|
±(4ms/m+2%*READING)
|
ACCURACY FOR 10 IN
|
±(8ms/m+2%*READING)
|
|
|
COMBINATION
A、 TTR+TGR+CNS+NEC+HAS(LDS+MAFL)+BDS
+REC+SONIC+D4GC+HDRT
B、 TTR+TGR+CNS+NEC+HAS(LDS+MAFL)+BDS
+REC+SONIC+DLS+HDRT